8
CLASSIC 8+ / TOP 8 | User Instructions
6.4 LED Lights
Connectivity LEDs
The connectivity LED light on the power supply has several modes:
1. Flashing blue light - waiting for Bluetooth® connection.
2. Steady blue light - connected via Bluetooth®.
3. Flashing green light - power supply is trying to connect to your home/pool Wi-Fi® network and
cloud, or a weak internet signal.
4. Steady green light - power supply is now connected to the Wi-Fi® network and to the cloud.
5. Alternating blue and green light - power supply is connected via Bluetooth® and trying to connect
to your home/pool Wi-Fi® network & cloud.
On/Off LEDs
1. Flashing green light - waiting for the next operation (delay mode or weekly timer).
2. Alternate blue/green/red lights – program updating remotely.
Please wait until process is completed.
3. Steady red light – fault. Refer to troubleshooting.
Tips
• If the app is stuck on the same screen for over 2 minutes, close the app and re-open it.
• To test your Wi-Fi® signal strength and quality, play a video via your smart device browser.
To Next Page
Loading...
