Maytronics Dolphin M600 - Removing from Pool

8
M600 / ZENIT 60 / ACTIVE X6 / ACTIVE ULTIMATE Robotic Pool Cleaner | User Instructions
Place the Robotic Pool Cleaner on the side of the pool
and let the water drain out.
Use the floating cable to pull the Robotic Pool Cleaner to the side of the pool.
Use the handle to remove the robot from the pool.
CAUTION
DO NOT PULL THE POOL CLEANER FROM THE POOL USING THE CABLE.
5.7.3
5.7.2
Turn OFF and unplug the power supply.
5.7.1
5.7 Removing the Robotic Pool Cleaner from the pool
WARNING