5-14
Driving Your Mazda
Starting and Driving
Form No. 8Q36-EA-01F
▼
Activation/Deactivation
To activate the system, push the CRUISE
MAIN switch.
To deactivate the system, push the switch
again.
▼
To Set Speed
1. Turn on the CRUISE MAIN switch.
2. Accelerate to the desired speed, which
must be more than 40 km/h (25 mph).
3.
(Type A)
Press the lever down to SET/COAST
and release it at the speed you want.
Release the accelerator at the same
time.
Don’t continue to hold the lever. Until
you release it, speed will continue to
drop (unless you continue to
accelerate) and you’ll miss the desired
speed.
Cruise main switch
Type A
Cruise main switch
Type B
Cruise Main Switch:
Leaving the CRUISE MAIN switch
on when not using the cruise control
is dangerous as it may be switched on
accidentally. This could result in loss
of vehicle control. Keep the CRUISE
MAIN switch off when cruise control
is not in use.
To Next Page
Loading...
