5-15
Driving Your Mazda
Starting and Driving
Form No. 8Q36-EA-01F
(Type B)
Press the SET/COAST button and
release it at the speed you want.
Release the accelerator at the same
time.
Don’t continue to hold in the button.
Until you release it, speed will
continue to drop (unless you continue
to accelerate) and you’ll miss the
desired speed.
▼
To Increase Cruising Speed
Follow either of these procedures.
•
(Type A)
Press the lever up to RES/ACC and
hold it. Your vehicle will accelerate.
Release the lever at the speed you
want.
Your vehicle has a tap-up feature that
allows you to increase your current
speed in increments of 1.6 km/h (1
mph) by a momentary tap of the lever.
Multiple taps will increase your vehicle
speed 1.6 km/h (1 mph) for each tap.
NOTE
•
The SET function can’t be activated
until about 2 seconds after the
CRUISE MAIN switch has been
engaged.
•
On a steep grade, the vehicle may
momentarily slow down going up or
speed up while going down.
J39L(02MY).book Page 15 Thursday, November 1, 2001 10:49 AM
To Next Page
Loading...
