Black plate (323,1)
3. Pull down the blade rubber and slide it
out of the blade holder.
4. Remove the metal stiffeners from each
blade rubber and install them in the
new blade.
CAUTION
Don't bend or discard the stiffeners.
You need to use them again.
5. Carefully insert the new blade rubber.
Then install the blade assembly in the
reverse order of removal.
Maintenance and Care
Owner Maintenance
8-31
CX-7_8X59-EA-07E_Edition3 Page323
Wednesday, July 25 2007 3:19 PM
Form No.8X59-EA-07E
To Next Page
Loading...
