AIR CONDITIONER
MAGNETIC CLUTCH
Disassembly / Assembly
1. Disassemble the magnetic clutch as shown in the figure.
2. Assemble the magnetic clutch in the reverse order of removal.
I
1. Pressure plate
2.
Rotor pulley
3. Stator
4. Shim
Inspection
Stator
1. Verify continuity between the stator terminals.
Note
l
Set the ohmmeter to x 1,000 range.
2. If there is no continuity, replace the stator.
Adjustment
Magnetic clutch clearance
Adjust the clearance between the pressure plate and the ro-
tor pulley by selecting and installing the proper shim(s).
Clearance: 0.4-0.5mm (0.016-0.020 in)
Part number
Thickness mm (in)
8455 61 L15
0.2 (0.008)
8456 61 L15
0.5 (0.020)
u-51
To Next Page
Loading...
