Temperature unit change function
The unit (°F/°C) for the ambient
temperature can be switched using the
following operation.
1. Switch the ignition ON.
2. Press the selector two times. After that,
the trip meter display turns off and the
unit flashes. The unit can be switched
by pressing the selector for approx. 1
second or more while the unit is
flashing.
3. The unit illuminates and the trip meter
is displayed by pressing the selector
again.
NOTE
The displayed ambient temperature varies from
the actual ambient temperature depending on
the surrounding conditions as well as the
driving conditions.
qTachometer
The tachometer shows engine speed in
thousands of revolutions per minute
(rpm).
3.7-liter engine
Red zone
2.5-liter engine
Red zone
CAUTION
Do not run the engine with the
tachometer needle in the RED ZONE.
This may cause severe engine
damage.
Driving Your Mazda
Instrument Cluster and Indicators
5-41
Mazda6_8BG7-EC-10H_Edition1 Page189
Monday, August 2 2010 1:27 PM
Form No.8BG7-EC-10H
To Next Page
Loading...
