Bulletin No: 09-036/14
© 2014 Mazda Motor of America, Inc.
Last Issued: 08/29/2014
Page 5 of 16
3. Insert both ends of the front door glass run channel between the front door glass and door panel, then install
the whole front door glass run channel.
4. Replace the front sash molding. Refer to MS3 online or Workshop Manual (section 09-16 FRONT SASH
MOLDING REMOVAL) and (section 09-16 FRONT SASH MOLDING INSTALLATION).
5. Remove the power outer mirror. Refer to MS3 online or Workshop Manual (section 09-16 POWER OUTER
MIRROR REMOVAL/INSTALLATION).
6. Remove the seal rubber (A) from the power outer mirror.
To Next Page
Loading...
