Mazda CX-8 - Page 113

(Second-row seat/Third-row seat)

If the tether strap does not reach the anchor bracket, use an extension strap.

When installing a child-restraint system to the second-row seat or third-row seat, adjust
the seat position of the front seat so that the child-restraint system does not contact the
front seat.
Refer to Adjusting the Driver's Seat on page 2-5.
Refer to Adjusting the Front Passenger's Seat on page 2-13.
Refer to Seat Operation (Second-row Seat (6:4 Split Adjustable-type Bench Seat Type))
on page 2-15.
Refer to Seat Operation (Second-row Seat (Captain Seat Type)) on page 2-19.

When installing a child-restraint system to the rear seat, refer to the child-restraint system
manufacturer's instructions and the Using ISOFIX Anchor on page 2-51.

An i-Size child-restraint system refers to a child-restraint system which has acquired
i-Size category certification for the UN-R 129 regulation.
Seating po-
sition
Passenger
Second-row
seat (Left)
Second-row
seat (Cen-
tre)
Second-row
seat (Right)
Third-row
seat (Left)
Third-row
seat (Right)
Airbag acti-
vated
Airbag
de-activated
Seating posi-
tion suitable
for universal
belted
(Yes/No)
Yes (UF) Yes (U) Yes (U) Yes (U) Yes (U) Yes (U) Yes (U)
i-Size seat-
ing position
(Yes/No)
No No Yes (i-U) No Yes (i-U) No No
Largest suit-
able rear-
ward facing
fixture (R1)
No No Yes (IL) No Yes (IL) No No
Largest suit-
able rear-
ward facing
fixture (R2)
No No Yes (IL) No Yes (IL) No No
Largest suit-
able rear-
ward facing
fixture
(R2X)
No No Yes (IL) No Yes (IL) No No
Essential Safety Equipment
Child Restraint
2-47
CX-8_8HJ9-EI-19E_Edition2_old 2020-4-15 13:00:04