in the instrument cluster turns on
simultaneously.
The ALH determine that it is nighttime
based on the brightness of the surrounding
area.
The system cancels operation when the
headlight switch is turned to a position
other than
, the headlights are
manually switched to low beams, or the
high beams are flashed on and off.
NOTE
The system can be changed so that the
ALH do not operate.
Refer to Personalisation Features on page
9-9.
▼
Manual Switching
Switching to low beams
Shift the lever to the low beam position.
The ALH indicator light (green) turns off.
Switching to high beams
Turn the headlight switch to the
position.
The ALH indicator light (green) turns off
and the
is illuminated.
When Driving
i-ACTIVSENSE
4-83
CX-8_8HJ9-EI-19E_Edition2_old 2020-4-15 13:00:04
To Next Page
Loading...
