Mazda CX-8 - Page 42

40
Maintenance and Care
Instrument panel illumination knob
For details, refer to Section 6, “Owner Maintenance”
Inspecting Engine Oil Level (SKYACTIV-D 2.2)
Whenever the engine oil is replaced, the vehicles engine control unit needs to be
reset as soon as possible. Otherwise the wrench indicator light or engine oil
warning light may turn on. To reset the engine control unit, consult an expert
repairer, we recommend an Authorised Mazda Repairer or refer to the vehicle
engine control unit reset procedure.
NOTE
The initialization (engine oil data resetting) of the recorded value can be
performed using the instrument panel illumination knob in the instrument
cluster as following:
1. Switch the ignition OFF.
2. Switch the ignition ON with the instrument panel illumination knob
pressed and continue pressing the knob for about 5 seconds until the
master warning light flashes.
3. After the master warning light flashes for several seconds, the
initialization is completed.
CX-8_8HJ9-EI-19E_Edition2_QuickGuide.indb 42CX-8_8HJ9-EI-19E_Edition2_QuickGuide.indb 42 2020/04/15 9:02:112020/04/15 9:02:11