4
–
132
When Driving
i-ACTIVSENSE
y
Under the following conditions, the Smart City Brake Support (SCBS) system may not
operate normally.
y
Heavy luggage is loaded in the luggage compartment or on the rear seat.
y
If there is the possibility of partial contact with a vehicle ahead.
y
When driving on continuously curving roads, and entering and exiting exits.
y
Elongated luggage or cargo is loaded onto installed roof rails and covers the laser
sensor (front).
y
Exhaust gas from the vehicle in front, sand, snow, and water vapor rising from
manholes and grating, and water splashed into the air.
y
When towing a malfunctioning vehicle.
y
When driving with tires having signi¿ cantly different wear.
y
In the following cases, the laser sensor (front) may inadvertently determine that there is a
vehicle ahead and the Smart City Brake Support (SCBS) system may operate.
y
Objects on the road at the entrance to a curve.
y
Vehicles passing in the opposite lane while making a curve.
y
Metal objects, bumps, or protruding objects on the road.
y
When passing through a toll gate equipped with a bar.
y
When passing under a vinyl curtain or À ag.
y
Plastic objects such as pylons.
y
Two-wheeled vehicles, pedestrians, animals or standing trees.
y
When the system operates, the user is noti¿ ed by the multi-information display.
y
The Smart City Brake Support (SCBS) warning indication (amber) turns on when the
system has a malfunction.
Refer to Warning Indication/Warning Lights on page 4-33 .
CX-98FD6-EA-16BEdition3.indb132CX-98FD6-EA-16BEdition3.indb132 2016/03/1811:22:332016/03/1811:22:33
To Next Page
Loading...
