Mazda CX-9 2016 - Page 86

3 – 4
Before Driving
Keys
CAUTION
Radio equipment like this is governed
by laws in the United States.
Changes or modi cations not expressly
approved by the party responsible
for compliance could void the user's
authority to operate the equipment.
N O T E
y
The keyless entry system operation may
vary due to local conditions.
y
The keyless entry system is fully
operational (door/liftgate lock/unlock)
when the ignition is switched off. The
system does not operate if the ignition is
switched to any position other than off.
y
If the key does not operate when pressing
a button or the operational range
becomes too small, the battery may be
weak. To install a new battery, refer to
Key Battery Replacement (page 6-40 ).
y
Battery life is about one year. Replace
the battery with a new one if the KEY
indicator light (green) À ashes in the
instrument cluster (for vehicles with
a type A instrument cluster (page
4-32 ), messages are displayed in
the instrument cluster). Replacing
the battery about once a year is
recommended because the KEY warning
light/indicator light may not illuminate
or À ash depending on the rate of battery
depletion.
y
Additional keys can be obtained at
an Authorized Mazda Dealer. Up to
6 keys can be used with the keyless
functions per vehicle. Bring all keys
to an Authorized Mazda Dealer when
additional keys are required.
Transmitter
Operation buttons
Operation indicator light
N O T E
y
The headlights turn on/off by operating
the transmitter. Refer to Leaving Home
Light on page 4-54 .
y
(With theft-deterrent system)

The hazard warning lights À ash when
the theft-deterrent system is armed or
turned off.

Refer to Theft-Deterrent System on page
3-48 .
y
(With the advanced keyless function)

A beep sound can be heard for
con¿ rmation when the doors and the
liftgate are locked/unlocked using the
key. If you prefer, the beep sound can be
turned off.

The volume of the beep sound can also
be changed.

Refer to Personalization Features on
page 9-11 .

Use the following procedure to change
the setting.
1. Switch the ignition off and close all
of the doors and the liftgate.
2. Open the driver's door.
CX-98FD6-EA-16BEdition3.indb4CX-98FD6-EA-16BEdition3.indb4 2016/03/1811:20:592016/03/1811:20:59