Mazda mx-5 2016 - Page 425

7 – 17
If Trouble Arises
Flat Tire
3. Turn the jack screw in the direction
shown in the ¿ gure and adjust the jack
head so that it is close to the jack-up
position.
Jack head
4. Place the jack under the jack-up
position closest to the tire being
changed with the jack head squarely
under the jack-up point.
Jacking position
5. Continue raising the jack head
gradually by rotating the screw with
your hand until the jack head is inserted
into the jack-up position.
Tire blocks
Jacking position
MX-58EU4-EA-15DEdition4.indb17MX-58EU4-EA-15DEdition4.indb17 2016/01/2010:56:502016/01/2010:56:50