Need help?Do you have a question about the Mazur Instruments PRM-8000 and is the answer not in the manual?
General| Radiation Detected | Gamma, X-Ray |
|---|---|
| Display | LCD |
| Alarm | Audible and visual |
| Detector Type | Geiger-Mueller tube |
| Units | µSv/hr, mR/hr, CPM |
| Power | 9V Battery |
Details the controls, indicators, and connections of the PRM-8000, including LCD, LED, keys, ports, and Geiger-Müller tube window.
Explains the procedure for turning on the PRM-8000 using the power button.
Guides on how to properly power down the PRM-8000 unit using the power button or utilities menu.
Defines power management settings for LCD and backlight inactivity, including different power levels and low battery conditions.
Details how to navigate through different measurement screens and access the main menu from the home screen.
Explains how to navigate the PRM-8000's menu system, including selecting sub-menus and returning to previous screens.
Provides an overview of the PRM-8000's main menu options: Timed Measure, Set Units, Settings, Utilities, Ext Audio/Data, Data Logging, and Language.
Details how to start a timed measurement and define its duration, offering options from 1 minute to 90 minutes.
Allows selection of desired dose rate measurement units such as µR/hr, mR/hr, µSv/hr, CPS, or CPM.
Configures beeper, LED, alarm thresholds, time/date, power settings, and averaging for low range measurements.
Includes options for resetting counters, performing hardware resets, loading factory defaults, and displaying battery/DC voltage.
Details entering the calibration routine requiring two calibrated dose rates (20mR/hr and 200mR/hr).
Configures the audio/data jack for headphones, USB interface, or Pulse Out for graphing software.
Sets data logging frequency, controls start/stop, shows status, and transmits logged data in CSV format.
Allows the user to select the display language for the PRM-8000, choosing between English and Japanese.
Explains how to reset the PRM-8000 using a paper clip on the reset switch to restore factory defaults.
Provides an alternative method to reset the device by removing and reinserting the battery after a 30-second wait.
Step-by-step guide to safely replace the internal 9-Volt battery, including precautions and reassembly.
To Next Page