MB Connect Line mbNET Series - Configuring The Device (Connection Data)

- 19 -
7.2.4 Conguringthedevice(connectiondata)
Navigation:Administration>Projects>Project Alpha (selected project)>NewDecice
(selected device)
Herethefollowingmenusarerelevantfortheinitialconguration:
•LAN(alldevices)
Make sure that the LAN IP and the
WAN IP are in diff erent address ranges.
•WiFi(deviceswithWiFimodem)
•Internet(alldevices)
For the initial confi guration, it is advisa-
ble to select “Always“ in the selection
fi eld “Connect to Server at“. Only in this
setting, the device automatically tries to
establish a connection to the portal.
•WAN(deviceswithWANinterface)
Make sure that the WAN IP and the
LAN IP are in diff erent address ranges.
•Modem(deviceswithmodem-analog,
2G,3G,4G)
Clicktheediticon
toeditthesettingsoftherespectivesub-menus.