MB QUART NAUTIC NF1-116 - User Manual

If you are replacing an older or inferior speaker, the
location is chosen for you. Make sure the speaker ts
properly in the hole for the old speaker.
If you are creating your own new location, you must be
careful to verify that there is sufcient depth to mount the
speaker.
Choose a suitable
mounting location
Speaker Mounting Location
Speaker Dimensions
CAUTION
Always consider consulting a professional audio installer
before installing new speakers. Many manufacturers locate
speakers behind interior panels that require special tools to
remove. Be careful and take your time.
If you are using the speaker wire supplied with your new
speakers make sure that you run the speaker wires only
through safe areas. Do not let speaker wire make contact with
metal edges or hot engine components.
Congratulations on your choice of a MBQuart speaker.
This “Quick Start” Installation guide is meant to help
you complete a basic installation. For more detailed
information on system setting, speaker and subwoofer
conguration, and full specications by model, visit our
website at mbquart.com
It’s a good idea to conrm that you have purchased the
correct size speakers to t your application. If you have any
reservations about being able to complete the installation
yourself, we recommend contacting a professional.
A B C D E
NF1-116
7.09”(180.2) 2.29”(58.3) .75”(19.2) 3.63”(92.3) 5.03”(128)
Before you start
Once you are sure the speaker ts and has
adequate clearance, connect the positive and
negative wires to the proper terminals. Securely
screw the speaker into place.
Carefully select a route for the speaker wires. If
using existing speaker wires, conrm that the wire is
in good shape and not shorted.
Conrm t and
mount speaker
Route signal
Speaker installation
Wiring
A
C
B
D
E
A
C
B
D
E
Illumination
Negative
Illumination
Positive
Audio Signal
Negative
Audio Signal
Positive
Audio Signal
Negative
Audio Signal
Positive
A
C
B
D
E
A
C
B
D
E
Illumination
Negative
Illumination
Positive
Audio Signal
Negative
Audio Signal
Positive
Audio Signal
Negative
Audio Signal
Positive

Summary

Getting Started and Safety

Before You Start

Confirm speaker size compatibility and consider professional help if unsure about installation.

Important Safety Precautions

Consult professionals for panel removal. Run wires safely, avoiding contact with metal edges or hot components.

Speaker Specifications and Installation

Speaker Dimensions Overview

Provides a diagram and table detailing speaker measurements (A through E) for model NF1-116.

Wiring Guide

Route speaker signal wires carefully, ensuring existing wires are in good condition and not shorted.

Mounting Location and Installation

Select a suitable mounting spot, confirm speaker fit and clearance, connect wires, and secure the speaker.

Warranty Information

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

This document is a Quick Start Installation Guide for the MBQuart NAUTIC NF1-116 speaker. It provides essential information for installing the speaker, including pre-installation considerations, mounting instructions, wiring, and final installation steps.

Function Description

The MBQuart NAUTIC NF1-116 is a speaker designed for audio reproduction, likely in a marine or outdoor environment given the "NAUTIC" designation. It is intended to be installed in a suitable location, either replacing an existing speaker or in a newly created mounting spot, to deliver audio output.

Important Technical Specifications

The guide provides detailed dimensions for the NF1-116 speaker, which are crucial for proper fit and installation:

• A (Overall Diameter): 7.09 inches (180.2 mm)
• B (Mounting Depth): 2.29 inches (58.3 mm)
• C (Mounting Height/Protrusion): 0.75 inches (19.2 mm)
• D (Cutout Diameter): 3.63 inches (92.3 mm)
• E (Magnet Diameter/Rear Clearance): 5.03 inches (128 mm)

These dimensions are critical for ensuring the speaker fits into the intended mounting location without obstruction and for determining the necessary cutout size.

Usage Features

• Quick Start Guide: The document is designed as a "Quick Start" guide to facilitate a basic installation, implying a straightforward process for users.
• Detailed Information Availability: For more in-depth information on system settings, speaker and subwoofer configuration, and full specifications, users are directed to the mbquart.com website.
• Mounting Flexibility: The guide addresses two primary mounting scenarios:
  • Replacing an existing speaker: Users should ensure the new speaker fits properly into the existing hole.
  • Creating a new mounting location: Users must verify sufficient depth for the speaker.
• Clear Wiring Instructions: The guide illustrates the connection of positive and negative audio signals, ensuring correct polarity for optimal sound.
• Secure Installation: Emphasizes securely screwing the speaker into place once fit and clearance are confirmed.

Maintenance Features

While the guide primarily focuses on installation, it indirectly touches upon maintenance through its warnings and recommendations:

• Professional Consultation: Users are advised to consult a professional audio installer, especially if they have reservations about completing the installation themselves or if the installation involves complex panel removal. This can prevent damage during installation that might lead to future maintenance issues.
• Careful Wire Routing: A critical warning is provided regarding speaker wire routing:
  • Select safe areas for wires.
  • Avoid contact with metal edges to prevent insulation damage and potential shorts.
  • Avoid contact with hot engine components to prevent wire degradation or melting.
  • If using existing speaker wires, confirm they are in good shape and not shorted, which is a preventative maintenance check.
• Warranty Information: The product comes with a one (1) year warranty from the date of purchase, covering defects in material and workmanship. This implies that any issues arising from manufacturing defects within this period would be addressed under warranty, reducing potential maintenance costs for the user. The warranty requires returning the product to an authorized retailer with a photocopy of the original receipt. It specifically excludes incidental or consequential damages, highlighting the importance of proper installation to avoid issues not covered by warranty.

The guide is presented by MBQuart, a brand that designs and engineers its products in the USA, under Maxxsonics USA Inc. The brand emphasizes "MUSIC. DEFINED." and uses social media hashtags like #MUSICDEFINED, suggesting a focus on audio quality and a modern brand presence.

MB QUART NAUTIC NF1-116 Specifications

General

Brand	MB QUART
Model	NAUTIC NF1-116
Category	Subwoofer
Language	English