mbl 6010 D
1
Important Information!
Attention! Keep the preamplifi er away from high humidity, vibration, excessive
dust and direct sunlight. Excessive heat or cold will a ect the preamplifi er´s
functionality. The permitted operating temperature is 10°C up to 40 °C (50°F
up to 104°F). Avoid extreme variations in temperature. Do not operate the pre-
amplifi er near other electric appliances (for instance neon light and motors).
The preamplifi er should not be opened without the assistance of a qualifi ed
technician!
WARNING: Do not connect any musical instruments (e.g. electric guitar etc.) to
the pre-amplifi er. This use for a purpose for which it is not designed – i.e. for a
purpose other than playback - can result in irreparable damage to the equip-
ment.
Do not operate the device under condensation! Allow the preamplifi er to warm
up at least three hours to room temperature after it has been exposed to low
temperatures.
Make sure that no fl uid-fi lled vessels (glasses,vases…) are put on the device to
prevent water from ingressing the device, and the device is never exposed to
splash water.
Please discard used batteries in accordance to your country´s laws.
KETI, CE-Marking
This product conforms to the requirements of the EMC directive and low-volt-
age directive. Your MBL component complies with the household power and
safety requirements in your area.
Warranty
Please pay attention to the details given in the warranty card which accompa-
nies the unit. Warranty is only issued, if you send back the warranty card.
To Next Page
Loading...
