What to do if MBM 1800S doesn't detect paper size?
To address the issue of no paper size detection on your MBM Folding Machine: * If you are not using standard norm paper, input the paper length manually. * Ensure the connector is firmly plugged in to avoid contact failure.
What to do if my MBM Paper folding machine is experiencing paper jams?
If your MBM Paper folding machine is experiencing paper jams, there are a few things you can try. First, remove the jammed paper by removing the Perforation/Scoring Unit from the Folding Machine. Alternatively, remove the jammed paper and adjust the mounting location of the Roller to ensure the Transport Rollers grip the perforating/scoring paper on both sides. You might also try slowing down the running speed of the machine.
How to fix torn scoring on MBM Paper folding machines?
If you're experiencing torn scoring with your MBM Paper folding machines, it could be due to the Upper Scoring Roller being too deep. Try lifting the Scoring Roller using the Shallower/Deeper Adjustment Screw. Also, check if the Upper Scoring Roller is properly aligned with the V-Grooved Lower Scoring Roller; if not, use the Fine Adjustment Dial to match them.
How to improve perforation on MBM Paper folding machines?
If your MBM Paper folding machine is not perforating sufficiently, ensure that the Perforating Blade is riding on the Blade Receipt Roller. If the Framed Perforating Blade is old or used, replace it with a new one.
General| Model | MBM 1800S |
|---|---|
| Folding Speed | Up to 18, 000 sheets/hour |
| Number of Folding Plates | 2 |
| Power Supply | 110V, 60Hz |
| Fold Types | Letter, Half, Double Parallel, Z-Fold, Gate, Church |
| Min. Paper Weight | 12 lbs |
Identifies key components of the Perforating Unit, including its mounting arm and fixing lever.
Steps to remove existing tables before installing the new unit.
Guide on how to physically install the Perforating/Scoring Unit into the machine.
Instructions for connecting the control wire and mounting plate.
Instructions for installing and adjusting the Perforating Block, including rollers and blade.
Procedure for testing the perforating function to ensure it meets desired settings.
Details on adjusting the location and angle of the perforation line.
Guide on performing continuous perforations on multiple sheets.
Step-by-step instructions for safely replacing the perforating blade unit.
Instructions for installing and adjusting the Scoring Block and its depth.
Procedure for testing the scoring function to ensure it meets desired settings.
Methods for adjusting the scoring line's location and depth.
Guide on performing continuous scoring on multiple sheets.
Solutions for issues where paper slips during operation.
Remedies for clearing paper jams and preventing recurrence.
Troubleshooting steps for slanted perforations or scoring.
Solutions for issues where perforation is incomplete or weak.
Remedies for scoring lines that are torn or damaged.
Solutions for issues where scoring is too shallow or incomplete.
To Next Page
