Need help?Do you have a question about the MC VISTA MEDIUM HANGING and is the answer not in the manual?
General| Brand | MC |
|---|---|
| Model | VISTA MEDIUM HANGING |
| Category | Indoor Furnishing |
| Language | English |
Install cam posts into the designated holes on both side panels.
Attach set shelves and rear cleats to the right side panel using cam posts and dowel pins.
Install the left side panel onto the assembled shelves and cleats, ensuring proper alignment.
Insert camlocks into shelves and cleats, then tighten clockwise to secure the cabinet structure.
Select the mounting location and use a stud finder to mark the positions of wall studs.
Level the unit and drill pilot holes through the rear hanging cleats into the marked studs.
Use 3-inch screws to firmly attach the rear hanging cleats to the wall studs.
Position the 'U' bracket on the left side panel and secure it with two screws.
Insert hanging rod into 'O' bracket, slide into unit, rest in 'U' bracket, and secure 'O' bracket.
Insert shelf pins into desired height holes and rest adjustable shelves on the pins.
To Next Page