2
Position the inner members to x the chassis.
a
Pull inner member of the slide rail out until it comes to a lock position.
To push the inner member into the rack, lift the latch and push the inner member.
b
Position both inner members.
3
Mount inner members to the chassis unit.
a
Place each inner member on both sides of the chassis unit. Position the mounting holes of the inner
member with matching mounting hooks on chassis unit.
b
Apply to both sides of chassis unit.
4
Install chassis unit into the rack.
a
Lift the release tab on both sides and push the inner members into the outer members until they lock in
place.
b
Continue to push the chassis unit in until fully closed.
5
To Next Page
Loading...
