Need help?Do you have a question about the McAfee NS Series and is the answer not in the manual?
Details the primary functions and capabilities of the NS-series Sensors in network traffic analysis and threat response.
Explains the considerations and topology examples for deploying NS-series Sensors within a network environment.
Identifies and describes the physical components and ports on the front and rear panels of the NS-series Sensor.
Provides a detailed explanation of the status and activity indicators (LEDs) on the NS-series Sensor's front and rear panels.
Outlines the specific limitations and prohibitions regarding the use and modification of the NS-series Sensor appliance.
Details critical safety warnings and precautions that must be followed before and during the installation of the Sensor.
Describes the types of fiber-optic connectors and compatible cable types used by the Sensor for monitoring.
Provides a step-by-step guide for safely unpacking the NS-series Sensor and its accessories from the shipping crate.
Outlines the sequential steps involved in setting up the NS-series Sensor, from positioning to final configuration.
Guides users on selecting an appropriate and secure physical location for the NS-series Sensor.
Provides detailed instructions for assembling slide rails and mounting the NS-series Sensor into a standard equipment rack.
Describes the features and capabilities of the 2-port QSFP28 module for 100 Gigabit Ethernet connectivity.
Details the 4-port module with single-mode fiber for 10/1 Gigabit Ethernet and its fail-open capability.
Explains the procedures for installing a network interface module into the NS-series Sensor, covering fresh and running installations.
Provides instructions on how to safely remove an installed network interface module from the NS-series Sensor.
Describes the enhanced SFP+ transceiver modules supporting data rates up to 10 Gbps.
Details the QSFP28 transceiver modules designed for 100G Ethernet applications.
Provides step-by-step instructions for inserting small form-factor pluggable transceiver modules into the Sensor.
Explains the process for safely removing transceiver modules from the NS-series Sensor.
Guides on connecting the console cable for initial setup and configuration of the NS-series Sensor.
Details how to connect the Response port cable for attack response functionality in tap or SPAN mode.
Explains the connection of the Management port cable for communication between the Sensor and the Manager.
Covers different operating modes and considerations for connecting cables to the Sensor's monitoring ports.
Describes the procedure for uploading and adding license files to the Manager for NS9500 Sensors.
Explains how to assign a procured license to a specific NS9500 Sensor through the Manager.
Details the steps to remove an assigned license from an NS9500 Sensor.
To Next Page
General
