McAfee NS Series - Unassign a license from a Sensor

Unassign a license from a Sensor
Task
To unassign the license, perform the following steps:
1 Go to Manager | <Admin Domain Name> | Setup | Licenses.
2 Click the Capacity tab.
3
Select the license you wish to unassign.
4 Click Other Actions | Unassign.
5 Click Ok.
Once a license is unassigned from a Sensor it will not be able to deploy pending changes, including new
signature sets and policy updates.
Remove a license from the Manager
Task
To remove a license, perform the following steps:
1 Go to Manager | <Admin Domain Name> | Setup | Licenses.
2 Click the Capacity tab.
3
Select the license you wish to unassign.
4 Click Other Actions | Remove.
5 Click Ok.
Once a license is removed from the Manager, the Sensor to which the license was assigned will not be able
to deploy pending changes, including new signature sets and policy updates.
7
Attaching cables to the Sensor
Managing licenses for NS9500 Sensors
36
McAfee Network Security Platform