McAfee NS Series - NS-series interface modules; 2-port QSFP28 100 Gigabit Network Interface Module

5
NS-series interface modules
The NS9500 Sensors support the 2-port, 4-port, 6-port, and 8-port Network Interface Modules. These modules
need to be installed in the respective slots on the Sensor.
For more information, see the Network Security Platform NS-series Interface Modules Reference Guide.
Contents
2-port QSFP28 100 Gigabit Network Interface Module
2-port QSFP+ 40 Gigabit Network Interface Module
4-port QSFP+ 40 Gigabit Network Interface Module
4-port 10/1 GigE SM 8.5 µm with internal fail-open Network Interface Module
4-port 10/1 GigE MM 50 µm with internal fail-open Network Interface Module
4-port 10/1 GigE MM 62.5 µm with internal fail-open Network Interface Module
4-port RJ-45 10 Gbps/1 Gbps/100 Mbps Network Interface Module
6-port RJ-45 10/100/1000 Mbps Network Interface module
8-port SFP/SFP+ 1/10 Gigabit Network Interface Module
Installation of the interface module
Remove an interface module
2-port QSFP28 100 Gigabit Network Interface Module
The 2-port QSFP28 (Quad Small Form-Factor Pluggable 28) Network Interface Module provides 100 Gigabit
Ethernet performance on each port.
Figure 5-1 2-port QSFP28 100 Gigabit interface module
5
McAfee Network Security Platform
19