McCulloch 250 - MAINTENANCE CHECK CHART

McCULLOCH
lim
CHAIN SAW
MODEL 250,300 MAINTENANCE CHECK CHART
A good preventive maintenance program of regular inspection and care will increase
life and improve performance of your new McCulloch chain saw. This maintenance
check chart is a guide for such a program. Frequencies listed are for average cutting
conditions. Cleaning, adjustment, and parts replacement may under certain conditions,
be required at more frequent intervals than those indicated. The chain oiler must be
kept constantly in good operating condition.
LAMINATION GAP
(Check)
(Inspect)
CONTROLS
U,-+-+-- (Inspect) --oIIIIIIE~- '-':
U+-I_+SCREWS. NUTS, BOLTS
(Inspect and tighten)'"
SPARK PLUG
WI-"--(Clean and adjust)
..... --(Replace)
o
EXHAUST PORTS
(Clean)
CHAIN
(Inspect and sharpen)
BAR
(Clean and turn)
SPROCKET
(Inspect)
\