Noise emissions measured in the environment as
sound power
2
ROB R600 ROB R800 ROB R1000
Measured sound power noise level, dB (A) 57 57 57
Guaranteed sound power noise level
WA
, dB (A) 59 59 59
Sound pressure noise level at the operator’s ear,
dB (A)
3
48 48 48
Mowing ROB R600 ROB R800 ROB R1000
Cutting system 3 pivoted cutting blades
Blade motor speed, rpm 2900 2900 2900
Power consumption during cutting, W +/- 20 % 20 20 20
Cutting height, cm / in. 2-5 / 0.8-2 2-5 / 0.8-2 2-5 / 0.8-2
Cutting width, cm / in. 17 / 6.7 17 / 6.7 17 / 6.7
Narrowest possible passage, cm / in. 120 / 47 120 / 47 120 / 47
Maximum angle for work area, % 25 25 25
Maximum angle for boundary wire, % 15 15 15
Maximum length boundary wire, m / ft. 400 / 1312 400 / 1312 400 / 1312
Maximum length guide loop, m / ft. 100 / 328 100 / 328 100 / 328
Working capacity, m
2
/ yd
2
, +/- 20% 600 / 718 800 / 957 1000 / 1196
IP-classification ROB R600 ROB R800 ROB R1000
Robotic lawn mower IPX4 IPX4 IPX4
Charging station IPX1 IPX1 IPX1
Transformer IPX4 IPX4 IPX4
Full compatibility cannot be guaranteed between the product and other types of wireless systems such
as remote controls, radio transmitters, hearing loops, buried electric animal fencing or similar.
The products are made in England or the Czech Republic. See information on the rating plate. Refer to
Introduction on page 3
.
2
Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC di-
rective 2000/14/EC and New South Wales legislation (Protection of the Environment Operations
Regulation 2017, Noise Control). The guaranteed sound power level includes variation in pro-
duction as well as variation from the test code with 1-3 dB(A). Noise emission data can be found
on the rating label and in the Technical data chapter.
3
Sound pressure noise uncertainties K
pA
, 2-4 dB (A)
44 - Technical data
1054 - 001 -
To Next Page