McCulloch CS 410 Elite User Manual

30 – English
TECHNICAL DATA
Guide bar and saw chain combinations
The following cutting attachments are approved for the models McCulloch CS 410 Elite and CS 450 Elite.
Saw chain filing and file gauges
EC-declaration of conformity
(Applies to Europe only)
Husqvarna AB , SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain
saws for forest service McCulloch CS 410 Elite and CS 450 Elite from 2011’s serial numbers and onwards (the year is
clearly stated in plain text on the type plate with subsequent serial number), are in conformity with the requirements of
the COUNCIL’S DIRECTIVES:
- of May 17, 2006 "relating to machinery" 2006/42/EC
- of December 15, 2004 ”relating to electromagnetic compatibility” 2004/108/EC .
- of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC .
For information relating to noise emissions, see the chapter Technical data. The following standards have been applied:
EN ISO 12100-2/A1:2009, CISPR 12:2007, EN ISO 11681-1:2008
Notified body: 0404, SMP Svensk Maskinprovning AB , Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has carried
out EC type examination in accordance with the machinery directive’s (2006/42/EC) article 12, point 3b. The certificates
for EC type examination in accordance with annex IX, have the numbers: 0404/11/2295 - CS 410 Elite, 0404/11/2296 -
CS 450 Elite.
In addition, SMP, Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has certified conformity
with annex V of the Council’s Directive of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC.
The certificates have the numbers: 01/161/090 - CS 410 Elite 01/161/091 - CS 450 Elite
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna 7 July 2011.
Bengt Frögelius, Development director chainsaw R&D (Authorized representative for Husqvarna AB and responsible for
technical documentation.)
Guide bar Saw chain
Length, inch Pitch, inch Gauge, mm Max. nose radius Type
Length, drive
links (no.)
13 0,325 1,3 10T
Husqvarna H30,
Universal Outdoor
Accessories CHO 033
56
15 0,325 1,3 10T
Husqvarna H30,
Universal Outdoor
Accessories CHO 034
64
16 0,325 1,3 10T
Husqvarna H30,
Universal Outdoor
Accessories CHO 035
66
18 0,325 1,3 10T
Husqvarna H30,
Universal Outdoor
Accessories CHO 037
72

McCulloch CS 410 Elite Specifications

General

Chain bar length	450 mm
Oil tank capacity	0.24 L
Fuel tank capacity	0.35 L
Engine displacement	40.9 cm³
Noise level	103 dB
Power source	Gasoline

Weight and Dimensions

Weight	4700 g