How to fix McCulloch Trimmer when motor fails to start?
If the motor of your McCulloch Trimmer fails to start when you depress the trigger and micro switches, there could be a couple of reasons. First, ensure the battery is securely in place by checking that the latches on the top of the battery pack snap into place. Second, the battery might not be charged. Charge the battery pack according to the instructions provided with your model.
What to do if my McCulloch Li 40HT Trimmer motor hums but the blades don't move?
If the McCulloch Trimmer motor hums but the blades don't move, it's likely that debris is jamming the blades. To resolve this, remove the battery and carefully clear any blockage from the blades.
Explains various safety symbols used in the manual for operator safety and product warnings.
Defines the meaning of signal words like DANGER, WARNING, and CAUTION to indicate risk levels.
Provides comprehensive rules for safe operation, including intended use and work area safety.
Warns about handling battery packs, preventing short circuits, and contact with ejected liquid.
Details specific safety precautions for operating the hedge trimmer, including blade contact and handling.
Identifies and labels the main components of the hedge trimmer using a diagram and list.
Lists common issues like starting failures or motor hums and provides corresponding solutions or service recommendations.
General| Power source | Battery |
|---|---|
| Battery voltage | 40 V |
| Blade size | 610 mm |
| Blade type | Double blade |
| Product color | Black, Yellow |
| Blade tooth spacing | 19 mm |
| No-load stroke rate | 2800 spm |
| Safety switch | Yes |
Weight and Dimensions| Depth | 980 mm |
|---|---|
| Width | 190 mm |
| Height | 120 mm |
| Weight | 3530 g |
| Package depth | 1010 mm |
| Package width | 220 mm |
| Package weight | 5540 g |
To Next Page