To Next PageTo Next Page
Need help?Do you have a question about the McCulloch MT2026 and is the answer not in the manual?
General| Line Diameter | 2.4 mm |
|---|---|
| Power type | Petrol |
| Engine Type | 2-stroke |
| Shaft Type | Straight |
| Handle Type | Loop |
| Engine displacement | 26 cc |
| Cutting System | Dual line |
Appliance has no internal serviceable parts; contact service for repairs.
Wear eye protection. Keep bystanders at a safe distance to prevent injury from debris.
Maintain distance from the rotating line. Ensure the guard is attached during operation.
Wear appropriate clothing like long pants, shoes, and gloves. Avoid loose items.
Ensure the work area is free of people and pets. Stop operation if approached.
Do not use near flammable materials or in wet/damp conditions. Avoid rain use.
Operate only as intended. Do not sweep with trimmer. Inspect area for debris before use.
Use only McCulloch-recommended accessories. Avoid wire or metal cutting lines.
Maintain stable footing and balance at all times to prevent loss of control.
Do not carry a plugged-in trimmer with a finger on the switch.
Unplug the trimmer when not in use or before performing service.
Store the trimmer indoors in a dry, secure location, out of reach of children.
Explains the meaning of NOTE, WARNING, and WARRANTY symbols used in the manual.
Install the debris shield onto the motor housing, aligning guides and ensuring a secure fit.
Instructions for removing and sharpening the cutter knife in the debris shield for optimal performance.
Securely attach the assist handle to the shaft at a comfortable working height.
Adjust the shaft length by pressing the lock button for optimal user positioning.
Convert the trimmer for edging tasks by rotating the handle assembly until it clicks.
Initial startup procedure: check nylon wires, connect power, and run briefly.
Connect the extension cord to the trimmer and power outlet before operation.
General operation for trimming and mowing, including cutting depth and direction.
Trim around tree trunks carefully, avoiding contact with bark to prevent damage.
Remove all vegetation down to the ground by tilting the string-head at an angle.
Use the unit as an edger, positioning the motor to the left for debris to be thrown rearward.
Do not use the trimmer for sweeping tasks; it is not designed for this purpose.
