Doc no: PT00098114 Revision A Aircraft Medical Ltd © 2019 www.medtronic.com/mac-first
5 Troubleshooting
IF ANY COMPONENTS BECOME LOOSE, PHYSICALLY DAMAGED OR FIT POORLY,
UNDER NO CIRCUMSTANCES USE THE EQUIPMENT. INSTEAD RETURN IT TO YOUR
AIRCRAFT MEDICAL AGENT OR DISTRIBUTOR FOR REPAIR OR REPLACEMENT.
No image shown on screen
If, when switched on, there is no display on the screen
• Replace battery unit.
Poor picture quality
If the image displayed on the screen is blurred or fuzzy
• Replace the blade
• Remove the blade and check that the image is clear. If necessary wipe the camera at the end
of the CameraStick™ with a lint free wipe.
If none of the above achieves positive results, return the unit to your Aircraft Medical agent or
distributor for diagnostics and repair.
No parts of the device are to be serviced or maintained while in use with the patient.
Ensure that before each use, the outer surface of the blade should be checked to ensure there are no
unintended rough surfaces, sharp edges or protrusions which may cause harm.
During use with MAC blade, if the camera system loses function and the LED remains functioning, the
device can still be used as a direct view Laryngoscope. During use with the MAC blade, a failure of the
LED requires the removal of the Video Laryngoscope and an alternative device to be used. During use
with the X-Blade, any failure of the camera system or LED requires the removal of the Video
Laryngoscope and an alternative device to be used.
Device switches o unexpectantly
If, when switched on, the device switches o without warning
• Press on/o button to switch the device back on
17
To Next Page
Loading...
