MCi iControl - Configuration - Car Operation

Configuration - Car Operation
9-29
9
Brake - Configuration Tab
Configuration - Car Operation
The Configuration > Car Operation tab is used to view and adjust car door and device behavior
under different operating modes. If you are viewing this as a PDF file, click the page number
link to jump to the description of the parameters on that tab. The car operation sub-tabs
include:
Table 9.5 Configuration - Car Operation Sub-tabs
Sub-tab Description See
Doors
Door device bypass timers, door motor protection tim-
ers, and door closing delay parameters.
page 9-30
Devices
Arrival fixture, CE Electronics fixture and voice com-
municator parameters.
page 9-33
Passenger
Door opening and closing, photo eye, dwell timers,
load weigher, car delayed timer, and call cancel param-
eters.
page 9-37
Fire Service
Applicable code Fire Service Recall and In-Car Fire-
fighter's Service parameters.
page 9-44
Independent Service
Independent Service parameters.
page 9-59
Elevator Recall
Elevator recall switches configuration.
page 9-61
Earthquake
Applicable code and advanced EQ parameters. Coun-
terweight device.
page 9-64
EMS
Emergency Medical Service operation parameters.
page 9-66
Emergency power
Emergency Power operating parameters.
page 9-70
CFSS
Commandeer for Special Service parameters.
page 9-73
Flood Operation
Determines car behavior during flood operation.
page 9-76
Attendant service
Attendant Service operation parameters.
page 9-78
Auto stop
Auto Stop operation parameters.
page 9-79
Sabbath operation
Sabbath operation parameters.
page 9-81
Shuttle Service Shuttle service parameters. page 9-84
Heat Detectors Heat Detector operation parameters. page 9-86