1A
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549 Part No. 04172100
D1100 Digital Preamplifier Input and Control Connections Diagram (when used as a DAC with an Analog only Preamplifier)
WLAN ANT 1
WLAN ANT 2
Digital Audio Player
AM/FM Tuner
Media Server
SACD/CD Transport
Note: Refer to the D1100 Owner’s Manual page 8 for additional connection information.
Connection Legend:
Data Cable*- Digital Signal Cable -
Sensor/Keypad Cable - RS232 Cable -
Power Control Cable* - Ground Wire -
Audio Signal Cable - AC Power Cords -
Video Signal Cable - Loudspeaker Cable -
RF Signal Cable -
* 2 conductor shielded with 1/8 inch stereo mini phone plug on each end.
Connect to
AC Outlet
Computer
Analog Preamplifier Controller
TO TUBE PREAMPLIFIER
RIGHT INPUT
TO TUBE PREAMPLIFIER
LEFT INPUT
To Next Page
