Need help?Do you have a question about the McIntosh MC402 and is the answer not in the manual?
General| Power Output | 400 watts per channel |
|---|---|
| Number of Channels | 2 |
| Total Harmonic Distortion | 0.005% |
| Damping Factor | >40 |
| Dynamic Headroom | 1.8dB |
| Output Voltage | 2.8V RMS Unbalanced, 5.6V RMS Balanced |
| Frequency Response | 20Hz - 20kHz |
| Power Requirement | 120V 50/60Hz |
| Dimensions | 17.5 inches |
| Frequency Response Extended | 10Hz to 100kHz +0, -3dB |
Essential safety points for operating and handling the equipment.
Guidelines for safe installation and connection procedures.
Warnings regarding electrical shock and exposure to elements.
Details pin configuration and connections for XLR inputs and power control signals.
Introduction to the MC402 amplifier and its sonic capabilities.
Details on power output, unique circuitry, autoformers, and protection.
Diagrams showing front, rear, and side views with measurements.
Guidelines and spacing for custom cabinet installation and airflow.
Visual guide to major components visible from the top of the unit.
Explanation of rear panel inputs, outputs, switches, and fuse holder.
Instructions for connecting speakers and audio sources for stereo operation.
Instructions for connecting speakers in mono parallel mode using jumper cables.
Description of front panel meters, switches, and indicators.
Procedures for powering the unit and selecting meter display modes.
Explanation of stereo/mono and input mode switch functions.
Core design principles, double balanced circuitry, and autoformers.
Details on protection circuits, power supply, and thermal management.
Detailed technical specs including power output, distortion, and frequency response.
Dimensions, weight, power requirements, and input impedance.
Instructions and parts list for secure repacking of the amplifier.
To Next Page
