Need help?Do you have a question about the McIntosh MC275 and is the answer not in the manual?
General| Damping factor | 20 |
|---|---|
| Amplifier class | - |
| Frequency range | 10 - 70000 Hz |
| Output impedance | 16 Ω |
| Audio output channels | 2.0 channels |
| Peak power per channel | 75 W |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Total Harmonic Distortion (THD) | 0.50 % |
| RMS power output per channel (2 Ohm) | 150 W |
| XLR in | Yes |
| Audio (L/R) in | 2 |
| Audio (L/R) out | 6 |
| Speakers connectivity type | Binding post |
| Purpose | Performance/stage |
| Product color | Black, Silver |
| Connectivity technology | Wired |
| Maximum current | 3.6 A |
| AC input voltage | 120 V |
| AC input frequency | 50 - 60 Hz |
| Package weight | 34100 g |
Weight and Dimensions| Depth | 304.8 mm |
|---|---|
| Width | 419.1 mm |
| Height | 209.6 mm |
| Weight | 30500 g |
Critical step to remove foam protecting vacuum tubes before connecting power.
Steps for connecting loudspeaker hookup cables to the output terminals.
Step-by-step guide for setting up stereo audio connections to the amplifier.
Steps for connecting loudspeaker hookup cables in mono mode.
Guidance on using jumper bars and connecting for mono parallel mode.
Details on the tube protection circuitry and how to reset it.
To Next Page
