Need help?Do you have a question about the McIntosh MC2300 and is the answer not in the manual?
Details RMS continuous power output for stereo and mono modes.
Covers harmonic and intermodulation distortion limits.
Specifies frequency response and noise/hum levels.
Details output impedance, voltages, damping factor, input impedance, and sensitivity.
Lists AC voltage, frequency, and power consumption.
List of replacement capacitor part numbers and specifications.
General| Power Output | 300 watts per channel |
|---|---|
| Input Impedance | 200k ohms |
| Frequency Response | 20Hz to 20kHz |
| Total Harmonic Distortion | 0.25% |
| Weight | 128 lbs |
| Input Sensitivity | 0.5V |
| Signal to Noise Ratio | 90dB |
To Next Page
