Do you have a question about the McIntosh MC2102 and is the answer not in the manual?
Details the amplifier's 100W stereo and 200W mono power output into various speaker impedances.
How to power the MC2102 on/off manually or via a remote control signal.
Configures operation for Stereo, Mono Parallel, or Mono Bridge modes and input selection.
| Power Output per Channel | 100 watts |
|---|---|
| Total Harmonic Distortion (THD) | 0.5% |
| S/N Ratio | 100 dB |
| Dynamic Headroom | 1.5 dB |
| Damping Factor | 20 |
| Input Impedance | 20 kΩ |
| Frequency Response | 20 Hz - 20 kHz (+0, -0.5 dB) |