Need help?Do you have a question about the McIntosh MC207 and is the answer not in the manual?
General| Damping factor | 140 |
|---|---|
| Amplifier class | - |
| Frequency range | 10 - 100000 Hz |
| RMS rated power | 1400 W |
| Output impedance | 8 Ω |
| Audio output channels | 7.1 channels |
| Peak power per channel | 200 W |
| Signal-to-Noise Ratio (SNR) | 112 dB |
| Total Harmonic Distortion (THD) | 0.000 % |
| XLR in | Yes |
| Speakers connectivity type | Binding post |
| Purpose | Home |
| Product color | Black |
| Volume control | Rotary |
| Connectivity technology | Wired |
| Maximum current | 12 A |
| AC input voltage | 120 V |
| AC input frequency | 50 - 60 Hz |
Weight and Dimensions| Depth | 533 mm |
|---|---|
| Width | 445 mm |
| Height | 239 mm |
| Weight | 37600 g |
Covers critical warnings like risk of electric shock and not opening the enclosure.
Provides a numbered list of essential instructions for safe operation and maintenance of the equipment.
Offers a thank you note and encourages familiarization with the amplifier's features and functions.
Details how to get help from McIntosh dealers or the service department for technical issues or repairs.
Provides essential details on connecting cables, including power control cables and loudspeaker wire gauge recommendations.
Explains XLR, Power Control, and Multi-Channel DB25 connector pin configurations for connectivity.
Highlights core functionalities like Power Output, Power Guard, Dynamic Power Manager, and input types.
Describes front panel controls and features such as Power Control, Illuminated Meters, and front panel illumination.
Provides comprehensive measurements of the MC207 amplifier for installation planning.
Illustrates front, rear, and side views of the unit, annotated with key dimensions.
Discusses options for upright placement, custom installation, and foot removal for cabinets.
Details minimum spacing, ventilation cutouts, and mounting shelf considerations for custom installations.
Identifies the various output connections for 4 or 8 ohm loudspeakers for each channel.
Details balanced and unbalanced audio input connectors for different channel configurations.
Explains Power Control inputs and the impedance selection switch for speaker matching.
Guides on connecting audio cables from A/V Control Center and setting up power control.
Details methods for preparing and connecting loudspeaker hookup cables to the amplifier terminals.
Guides on connecting audio cables for five channels and setting up power control.
Details methods for preparing and connecting loudspeaker hookup cables for five-channel configurations.
Guides on connecting audio and power control for two channels in Zone B operation.
Details methods for preparing and connecting loudspeaker hookup cables for two-channel (Zone B) configurations.
Describes the three power output meters indicating audio signal level to front channels.
Explains the function of Power Guard LEDs and the Remote On indicator light.
Details the function of the Meter Lights and Power switches on the front panel.
Instructions for turning the amplifier on manually or via remote control from a McIntosh A/V Control Center.
Guides on adjusting meter brightness and setting the speaker impedance switch for optimal performance.
Explains how to read the power output meters and their calibration for Watts or Decibels.
Discusses McIntosh's commitment to high fidelity, linearity, and the role of negative feedback in audio design.
Presents a simplified block diagram illustrating the signal path within one of the seven amplifier channels.
Explains the DPM technology enabling consistent power delivery for 4 or 8 ohm speakers.
Details the Sentry Monitor and Power Guard circuits that protect the amplifier and speakers.
Describes the high-current power supply, toroidal transformer, and filter capacitors supporting the amplifier channels.
Lists key performance metrics including power output, distortion, frequency response, and sensitivity.
Details input impedance, signal-to-noise ratio, and intermodulation distortion figures.
Provides overall dimensions, weight, and power requirements for the MC207 amplifier.
Provides detailed steps and illustrations for properly repacking the MC207 for shipment.
Lists the part numbers for shipping carton components and foam pads required for secure packaging.
To Next Page
