Need help?Do you have a question about the McIntosh MC500 and is the answer not in the manual?
General| Total Harmonic Distortion (THD) | 0.005% |
|---|---|
| Input Sensitivity | 2.5V |
| Power Output | 500 watts per channel into 2, 4 or 8 ohms |
| Frequency Response | 20Hz to 20kHz (+0, -0.25dB) |
| Input Impedance | 20k ohms |
Details connecting inputs for Bridged Mono configuration using either Unbalanced RCA or Balanced XLR.
Explains using Output Autoformers with 2, 4, or 8 ohm taps for matching loudspeakers.
Describes connecting speakers for 1000 watt mono operation using specific output terminals.
Monitors output stage conditions to prevent damage from short circuits or low impedance loads.
Details the patented circuit that prevents clipping distortion by monitoring input/output waveforms.
Explains the Autoformer's role in matching impedance, ensuring efficiency, and protecting speakers from DC.
Covers critical performance metrics including power output, distortion, frequency response, and SNR.
Details Power Guard functionality, power input requirements, and operational parameters.
To Next Page
