Need help?Do you have a question about the McIntosh MC302 and is the answer not in the manual?
General| Damping factor | 40 |
|---|---|
| Amplifier class | - |
| Frequency range | 10 - 100000 Hz |
| RMS rated power | 600 W |
| Audio output channels | 2.0 channels |
| Peak power per channel | 300 W |
| Signal-to-Noise Ratio (SNR) | 122 dB |
| Total Harmonic Distortion (THD) | 0.005 % |
| XLR in | Yes |
| Speakers connectivity type | Binding post |
| Product color | Black |
| Connectivity technology | Wired |
| Maximum current | 6.6 A |
| AC input voltage | 110 V |
| AC input frequency | 50 - 60 Hz |
Weight and Dimensions| Depth | 558.8 mm |
|---|---|
| Width | 444.5 mm |
| Height | 239.7 mm |
| Weight | 44450 g |
Crucial warnings regarding fire, moisture, electrical shock, and avoiding internal access for safety.
Details cutout dimensions and minimum spacing for optimal cooling and installation.
Describes rear panel inputs, outputs, and the INPUT MODE switch for signal selection.
Guides on attaching hookup cables to output terminals using bare wire or banana plugs.
Details connecting spade lugs or prepared wire ends to terminals for secure speaker connections.
Covers power on/off, remote control, and meter display modes (Watts, Hold, Lights Off).
To Next Page
