McIntosh MC302 User Manual

7
6.6
Connect the MC302 power
cord to a live AC outlet. Refer
to the rear panel to determine
the correct voltage
POWER CONTROL IN
receives turn On/Off
signals from a McIntosh
component.
POWER CONTROL OUT
1 and 2 send turn On/Off
signals to the next McIn-
tosh Component
Unbalanced INput (LEFT and
RIGHT Channels) for an audio
cable from a Preamplifier or A/V
Control Center audio output
INPUT MODE switch
selects between Balanced
or Unbalanced Inputs
Balanced INputs (RIGHT
and LEFT Channels) for
audio cables from a Pre-
amplifier or A/V Control
Center audio output
RIGHT OUTPUT Connections
for a 2 ohm, 4 ohm or 8 ohm
Loudspeaker
Rear Panel Connections and Switch
Fuse holder, refer to information
on the rear panel of your MC302
to determine the correct fuse
size and rating
LEFT OUTPUT Connections
for a 2 ohm, 4 ohm or 8 ohm
Loudspeaker

McIntosh MC302 Specifications

General

Damping factor	40
Amplifier class	-
Frequency range	10 - 100000 Hz
RMS rated power	600 W
Audio output channels	2.0 channels
Peak power per channel	300 W
Signal-to-Noise Ratio (SNR)	122 dB
Total Harmonic Distortion (THD)	0.005 %
XLR in	Yes
Speakers connectivity type	Binding post
Product color	Black
Connectivity technology	Wired
Maximum current	6.6 A
AC input voltage	110 V
AC input frequency	50 - 60 Hz

Weight and Dimensions

Depth	558.8 mm
Width	444.5 mm
Height	239.7 mm
Weight	44450 g