Need help?Do you have a question about the McIntosh MC312 and is the answer not in the manual?
General| Number of Channels | 2 |
|---|---|
| Total Harmonic Distortion | 0.005% |
| Signal to Noise Ratio | 120dB |
| Damping Factor | >40 |
| Rated Power Band | 20Hz to 20kHz |
| Frequency Response -3dB | 10Hz to 100kHz |
| Remote Power Control | Yes |
| Multi-Channel DB25 Cable | No |
| Output Impedance | 2, 4 or 8 ohms |
| Power Output per Channel | 300 Watts |
| Power Output per Channel @ 2, 4 or 8 Ohms | 300W |
| Input Impedance | 20k Ohms |
| Dimensions | 17-1/2" (44.45cm) x 9-7/16" (23.97cm) x 21" (53.34cm) |
Details the amplifier's power output capabilities and distortion.
Explains the function and benefits of McIntosh Autoformers.
Explains the circuit that prevents amplifier clipping.
Explains how to turn the amplifier on manually or remotely.
Details the power saving circuitry and its control.
Details the high-current, high-voltage power supply design.
Explains the function and benefits of the output Autoformers.
Details the Sentry Monitor and Power Guard protection circuits.
Lists continuous average power output for different loads.
Details maximum harmonic distortion levels.
Specifies AC voltage and current requirements.
To Next Page
