Need help?Do you have a question about the McIntosh MC205 and is the answer not in the manual?
General| Damping factor | 140 |
|---|---|
| Amplifier class | - |
| Frequency range | 10 - 100000 Hz |
| RMS rated power | 1000 W |
| Output impedance | 8 Ω |
| Audio output channels | 5.0 channels |
| Peak power per channel | 200 W |
| Signal-to-Noise Ratio (SNR) | 112 dB |
| Total Harmonic Distortion (THD) | 0.005 % |
| XLR in | Yes |
| Audio (L/R) out | 10 |
| Line inputs (RCA) | 5 |
| Speakers connectivity type | Binding post |
| Purpose | Home |
| Product color | Black |
| Connectivity technology | Wired |
| Maximum current | 10 A |
| AC input voltage | 100-240 V |
| AC input frequency | 50 - 60 Hz |
| Package weight | 51800 g |
Weight and Dimensions| Depth | 533 mm |
|---|---|
| Width | 444.5 mm |
| Height | 239.7 mm |
| Weight | 44200 g |
Overview of the MC205 Power Amplifier and its sonic qualities.
Details on Power Output, Power Guard, Dynamic Power Manager, and other features.
Controls for turning the amplifier on or off manually or via remote.
Controls the illumination of the front panel meters.
Selects the impedance (4 or 8 ohm) for the output terminals.
Explains the function and calibration of the power output meters.
Explains the use of Dynamic Power Manager (DPM) circuitry.
Details Sentry Monitor and Power Guard protection circuits.
Describes the high current power supply and toroidal transformer.
To Next Page
