McIntosh MC312 Connection Diagram

MC312 Connection Diagram
1A
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 www.mcintoshlabs.com Part No. 04188400
DISABLED
Note: Refer to the MC312 Owner’s Manual page 7 for additional connection information.
Connection Legend:
Data Cable*- Digital Signal Cable -
Sensor/Keypad Cable - Network/RS232 Cable -
Power Control Cable* - Ground Wire -
Audio Signal Cable - AC Power Cords -
Video Signal Cable - Loudspeaker Cable -
RF Signal Cable -
* 2 conductor shielded with 1/8 inch stereo mini phone plug on each end.
Connect to
AC Outlet
Audio Preamplifier
Left Loudspeaker System
-
+
Right Loudspeaker System
-
+

McIntosh MC312 Specifications

General

Number of Channels	2
Total Harmonic Distortion	0.005%
Signal to Noise Ratio	120dB
Damping Factor	>40
Rated Power Band	20Hz to 20kHz
Frequency Response -3dB	10Hz to 100kHz
Remote Power Control	Yes
Multi-Channel DB25 Cable	No
Output Impedance	2, 4 or 8 ohms
Power Output per Channel	300 Watts
Power Output per Channel @ 2, 4 or 8 Ohms	300W
Input Impedance	20k Ohms
Dimensions	17-1/2" (44.45cm) x 9-7/16" (23.97cm) x 21" (53.34cm)