Need help?Do you have a question about the McIntosh MC501 and is the answer not in the manual?
General| Rated Power Band | 20 Hz - 20 kHz |
|---|---|
| Total Harmonic Distortion | 0.005% |
| Power Output | 500 Watts |
| Power Output per Channel | 500 Watts |
| Frequency Response | 20Hz - 20kHz (+0, -0.25dB) |
| Input Impedance (balanced) | 20k ohms |
| Input Impedance (unbalanced) | 10 kΩ |
| Dimensions (W x H x D) | 445 x 260 x 559 mm |
Details the amplifier's capability of 500 watts into 2, 4, or 8 ohm speakers.
Explains the output autoformer's role in matching loads and providing DC protection.
Describes the circuit that prevents amplifier overdrive and clipping.
Covers output stage protection circuits guarding against overheating.
Instructions on preparing speaker cables using bare wire, spade lugs, or banana plugs.
Describes the power meter's function, modes, and the meter selection switch.
Explains the Power Guard indicator and the functions of the main power switch.
Details automatic and manual power turn-on/off procedures.
Lists detailed specifications for power output, distortion, frequency response, and noise ratio.
To Next Page
