Need help?Do you have a question about the McIntosh MC75 and is the answer not in the manual?
General| Power Output | 75 Watts |
|---|---|
| Total Harmonic Distortion | 0.5% |
| Input Impedance | 250k Ohms |
| Type | Vacuum Tube Amplifier |
| Frequency Response | 20Hz to 20kHz |
| Output Impedance | 4, 8, Ohms |
| Tube Complement | 1 x 12AX7 |
Details input sensitivity, impedance, and gain control settings for optimal signal reception.
Explains speaker connections for various impedances and grounding options on the barrier strip.
Lists octal socket connections for speaker impedances and constant voltages, including wiring details.
Specifies the 3.2 ampere slo-blo fuse type and rating required for protection.
Describes the auxiliary AC outlet's power capacity and notes it is not fused.
Covers the line voltage selection switch for adapting to different power grids.
Guides setting the line voltage switch based on local power for correct operation.
Explains gain control adjustment for different preamp types and program sources.
To Next Page
