McIntosh MC275 User Manual

19
Packing Instructions
Packing Instructions
Quantity Part Number Description
1 034529 Shipping carton
1 034526 Foam Pad Top
2 034527 Foam Pad Bottom
1 034528 Foam Insert (for protecting
the Tubes during shipping)
1 041314 Warning Sheet
4 400131 10-32 x 1/2 inch screw
4 163073 Feet
In the event it is necessary to repack the equipment
for shipment, the equipment must be packed exactly
as shown below. It is very important that the four feet
are attached to the bottom of the equipment. This will
ensure the proper equipment location on the bottom
foam pad. Failure to do this will result in shipping
damage.
To protect the tubes during shippment, the Foam
Insert removed from the MC275 needs to be re-insert-
ed. Follow the unpacking instructions on pages 4-5 in
the reverse order.
Use the original shipping carton and interior parts
only if they are all in good serviceable condition. If
a shipping carton or any of the interior part(s) are
needed, please call or write Customer Service Depart-
ment of McIntosh Laboratory, refer to page 3. Please
see the Part List for the correct part numbers.
SHIPPING
CARTON
FOAM PAD
BOTTOM
TUBE COVER
WITH TUBE
FOAM INSERT
INSIDE TO
PROTECT THE
TUBES
POLY BAG
FOAM PAD
TOP
UNIT WITH
(4) FEET ON
BOTTOM
COVER
WARNING
SHEET

McIntosh MC275 Specifications

General

Damping factor	20
Amplifier class	-
Frequency range	10 - 70000 Hz
Output impedance	16 Ω
Audio output channels	2.0 channels
Peak power per channel	75 W
Signal-to-Noise Ratio (SNR)	100 dB
Total Harmonic Distortion (THD)	0.50 %
RMS power output per channel (2 Ohm)	150 W
XLR in	Yes
Audio (L/R) in	2
Audio (L/R) out	6
Speakers connectivity type	Binding post
Purpose	Performance/stage
Product color	Black, Silver
Connectivity technology	Wired
Maximum current	3.6 A
AC input voltage	120 V
AC input frequency	50 - 60 Hz
Package weight	34100 g

Weight and Dimensions

Depth	304.8 mm
Width	419.1 mm
Height	209.6 mm
Weight	30500 g