Do you have a question about the McIntosh MA6900 and is the answer not in the manual?
Total Harmonic Distortion | 0.005% |
---|---|
Signal to Noise Ratio | 100dB |
Input Impedance | 20k ohms |
Damping Factor | >40 |
Outputs | preamp outputs |
Weight | 75 lbs (34 kg) |
Input Sensitivity | 2.5mV (MM phono), 0.25V (line) |
Output Impedance | 2, 4 or 8 Ohms |
Frequency Response | 20Hz to 20kHz (+0 -0.5dB) |
Inputs | 6 line-level inputs (including balanced), 1 phono input |
Details amplifier's power output, frequency response, sensitivity, and distortion levels.
Guidelines for interpreting schematics, component values, and safety precautions.
Diagram showing component locations on the top side of the amplifier with cover removed.
Diagram showing component locations on the bottom side of the amplifier with cover removed.
Schematic for the amplifier's control and user interface circuitry.
Schematic diagram for the indicator lamps and their driving circuitry.
Exploded view of the amplifier's main chassis, internal boards, and structural components.
Exploded view of front panel controls, chassis, and external hardware.
Detailed list of parts shown in the exploded views, with item numbers.
Detailed steps and required materials for safely repacking the unit for shipment.