EasyManua.ls Logo

McIntosh MAC 4200

McIntosh MAC 4200
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AM SECTION
SENSITIVITY
75µV IMF (External antenna)
SIGNAL TO NOISE RATIO
50 dB at 30% modulation, 60 dB at 100% modulation
HARMONIC DISTORTION
1% maximum at 30% modulation (0.3% typical)
FREQUENCY RESPONSE
-6 dB, at 3500 Hz
ADJACENT CHANNEL SELECTIVITY
30 dB minimum IHF
IMAGE REJECTION
60 dB minimum, 540 kHz 1600 kHz
GENERAL INFORMATION
SEMICONDUCTOR COMPLEMENT
142 Silicon Diodes
18 Tuning Devices
1 Silicon Controlled Rectifier (SCR)
42 Light Emitting Diodes
4 Seven Segment LED Displays
67 Bipolar Transistors
21 Field Effect Transistors
37 Integrated Circuits
AC POWER OUTLETS
2 Green, turntable current-sensing, 100 watts
2 Black, switched, 1 Red, unswitched, 1200 watts, total
POWER REQUIREMENTS
120 volts, 50/60 Hz, 60 to 480 watts
MECHANICAL INFORMATION
SIZE
Width: 18-9/16 inches (47.1 cm); with walnut wood sides
removed: 17-9/16 inches (44.6 cm). Height: 6-1/16 inches
(15.4 cm); with the feet removed 5-1/4 inches (13.3 cm).
Depth: 14 inches (35.6 cm) from the mounting surface to
the rear panel, including connectors. Knob and handle
clearance required is 1-1/16 inches (2,7 cm) in front of the
mounting surface.
FINISH
Front panel is brushed black anodized with gold anodized
trim. Side panels are machined solid walnut with satin lac-
quer finish.
WEIGHT
40 pounds (18.1 kg) net, 54 pounds (24.5 kg) in shipping
carton.
PERFORMANCE LIMITS 17

Related product manuals