McIntosh MCD1100 User Manual

18
'LUHFW7UDFN6HOHFWLRQ
The MCD1100 Front Panel Display indicates the Disc
Track currently playing. Use the Remote Control
180(5,&3XVKEXWWRQVWRHQWHUWKHGHVLUHG7UDFN
Number. Refer to pages 14 and 15 for additional infor-
mation using the Remote Control.
Repeat
This allows repeating a Track, Disc, Program Mode
or Random Play Mode on a continuous basis. Refer to
figures 6 on page 16 and figure 36.
1. With the disc playing (Regular, Program or Ran-
GRP3OD\EDFN0RGHVSUHVVWKH5(3($73XVK
button once to activate the Track Repeat (12
press the REPEAT
Push-button twice to
activate the Disc Re-
peat (12$OO5HIHUWR
figures 18 and 19.
2. To cancel the previ-
ously selected Re-
peat Mode, press the
REPEAT Push-button
until the word “1” or
the word “ALL” in the Front Panel Information
Display is extinguished.
5DQGRP3OD\EDFN
This feature allows for listening to Tracks of a Disc
in a Random Order. Refer to figure 6 on page 16 and
figure 36.
Note: The MCD1100 must be in STOP Mode with the
Disc Loaded and the Table of Contents read
before the Random Playback Mode Feature can
be activated.
1. With the MCD1100 in the STOP Mode press the
How to Operate the MCD1100, con’t
Random Push-button. The word RANDOM will
be indicated in the
Information Display.
Refer to figure 20.
2. Press the PLAY/
PAUSEf/ Push-
button to start Random Playback. After all the
tracks have been played the MCD1100 will stop.
Notes: 1. To provide continuous playback of the
disc, press the REPEAT Push-button twice
to activate the Disc Repeat (12All) after
the Random Playback Mode has started. If
Repeat (121) is selected, the current track
will repeat.
2. The BACK TRACK  function will begin
playback from the beginning of the current
track.
3. The NEXT TRACK  function will
advance to the next random selection and
start playing.
3. To cancel the Random Playback Mode, press the
STOP Push-button, then press the RANDOM
Push-button.
3URJUDP3OD\EDFN
This feature allows for playback of selected Tracks on
a Disc in the desired order. In the following example, a
Disc is programmed to play Track 6 followed by Track
4 and then Track 2.
Notes: 1. The MCD1100 must be in STOP Mode with
the Disc TOC (Table of Contents) read before
the Program Playback Mode Feature can be
activated.
2. When programming Hybrid SACD Discs, first
choose the layer (SACD or CD) so the correct
TOC can be read, as some discs have different
selections for the SACD and CD Tracks.
3UHVVWKH3*03URJUDP3XVKEXWWRQWRDFFHVV
the Program Mode.
Refer to figures 36
and 21.
2. Enter the first desired
selection using the
Numeric Push-buttons. Refer to figures 36 and 22.
3. In a similar manner,
enter the remaining
Tracks. Refer to fig-
ures 23 and 24.
Note: To view and/
or delete the
selections pro-
grammed, use
the REVIEW
Push-button to
step through
programmed
tracks and the
CLEAR Push-
button to remove any unwanted selections.
4. To start playback of the just entered program,
press the PLAY/PAUSEf/ Push-button. The
Repeat Mode can be activated to provide continu-
ous playback of the
3URJUDPPHG7UDFNV
Refer to figure 25.
Note: To momentarily
stop play-
back, press the PAUSEPush-button. To
resume Program Playback press the PLAY/
PAUSEf/ Push-button.
5. To cancel the Program Playback Mode press the
STOP Push-button followed by pressing the
3*03URJUDP3XVKEXWWRQ
Figure 18
02:36
Figure 19
02:36
Figure 20
02:36
Figure 21
12Tr
Figure 22
P01 06Tr
Figure 23
P02 04Tr
Figure 24
P03 02Tr
Figure 25
P01 06Tr

McIntosh MCD1100 Specifications

General

Brand	McIntosh
Model	MCD1100
Category	CD Player
Language	English