15
Changing Remote Control Batteries
Someday, the two AAA battery in the Remote Control
will need to be replaced. To replace the two AAA
batteries:
• Locate the battery door. Looking at the back of
the remote, the battery door is in the lower part
• Slide battery door towards the bottom of the
Remote Control. The battery door will slide
open 1/4 inch (0.63cm)
• Lift the door up to reveal the batteries
• Remove the old batteries
• Insert two new AAA batteries noting the polarity
which is printed on the bottom of the battery
compartment. The spring will connect with the
negative (-) part of the battery
• Place the door over the batteries leaving a
1/4 inch gap
• Slide the door up towards the top of the remote
to secure
Note: If at any time the Player seems unresponsive to
the desired Remote Control Command, it may be
necessary to select the color of the push-button
nomenclature for the desired command. This
is accomplished by first pressing the SHIFT
Push-button to select gold, as indicated by the
LED, and then within 3 seconds pressing (or in
the case of some functions repeatedly pressing)
the desired command push-button.
To Next Page
Loading...
Need help?
General
